Actualisation is our mission!
®
We are a Chemical Engineering consultancy group. We deal with Chemical process layout and manufacturing management. For plant optimisation, Chemical Process plant operations, Piping and Instrumentation Drawings (P&ID), and plant design engineering, we are here to give you the best services where others failed. Optimisation of units of operation and making them more efficient for your refinery, the process for chemical products or the pharmaceutical industry.
We optimise process plants' Units of Operations!
 Modelling of Industrial Mixing ValvesThe 3D Modelling and testing of Various industrial mixing valves was underway in 2021-2022 by one of our engineers with innovative change of geometric configurations to enhance mixing of steam and crude oil in the Desalter process. The Dimensional analysis is used for various sensitive parameters to analyse both the geometric, kinetic and dynamic similarities to optimise the efficiency of this thermodynamic device. |  Process simulationSimulation gives engineers the data and the edge required to learn the behaviour of a process and be able to use that data garthered to adjust appropriately the operational parameters that are sensitivity to change within the system. Each process setup is unique and there is the need to be on top of run away process to enhance productivity, future optimisation and safety of operators. Our clients need not to worry. We give adequate trainings for all unit of operations. |  Unit of Operation InstallationNewly installed unit of operations. We provide all subassemblies for your unit of operations after they have been tested. For further information, please contact our process control department or sign out client form. |  Laboratory testsLaboratory tests of product samples. We test both the final products, work-in-progress, byproducts and the feedstreams as required. Mass and energy balance calculations for the process are also carried out for sizing, costing, energy utility both for the optimisation of systems and the adjustment of operational parameters to make sure the process is producing the required clients' products specifications. |
|---|---|---|---|
 Crude Oil Assay TestThe initial stage of any Refinery started from knowing much about the Crude oil Assay. We have over 25 different Crude oil assays from different countries, with their Chemical safety datasheet (CSD), linked to important Material safety datasheet (MSDS). We also have a compilations of important industrial chemicals' safety datasheet, which can be downloaded for your use from our database files. You just need to navigate to our whitepapers and database section. |  Lubricating Crankshaft Piston assemblyWe work with Automotive industry to provide the best lubricating oil grade required |  Testing new installationsNew installations are adequately tested for engineering operating conditions during the start-up procedure. Our qualified engineers make sure that the controls and safety valves, equipment and all necessary features and fittings are all tested and in place before the full production. We are also at a standby to rectify any issues. |  3D Computer Aided Design (CAD)The 3D drawing of the new chemical plant assembled are all enhanced by our real-life data gathered over years of experience and our hard working engineers. This includes operational engineering conditions and all the necessary input feedstreams. |
 Mathematical modelling of ProcessesWe have Chemical engineers that deals with modelling of chemical systems. Mathematical modelling of processes is one of the key stages of modelling of any chemical plant process in which variable parameters are considered and subjected to physical and chemical laws due to the behaviour of the process. With the engineering conditions, the equations are derived and tested to see if they represent the system. |  Globe Pressure Valve Design & AnalysisThe simulation of Globe pressure Valve with real -life data for Desalter process. Other unit of operation thermodynamic devices are modelled and tested for more innovative and economic process plant. |  3D modellingOur team on the 3D Computer-aided design (CAD) modelling. Our CAD engineers are ready to help you create state-of-the-art designs for your products. You just need to become our client. Click the Business button to join us. |  Modular RefinerySmall Scale Modular refinery are the new growing clients we serve. |
We provide detailed FEL, FEED & Engineering!
To make your engineering design goes more smoothly and less expensive during the development stages, we help with Front-end Loading (FEL), Front-end engineering design (FEED) and detailed engineering design, including the simulation and schematic design for your oil and gas refinery, the process for chemical products, and pharmaceuticals.
WE DELIVER
THE PROCESS FOR
YOUR PRODUCTS...
Front-end loading (FEL) is the pre-project planning, carrying out the feasibility study and analysis to provide the front-end engineering design (FEED), conceptual planning, simulation and schematic design for your oil & gas refinery, natural gas refining, and pharmaceuticals.
This will give you sufficient data and information with which you can address risks, manage them and make decisions to commit resources in order to maximize profits from your establishment.
As Chemical engineers, we are responsible for the industrial processes required to make products.
We are involved in the design, manufacture and operation of plants and machinery or the development of new products and technologies.
​
Valuable resources, time, and financial costs, due to unduly less optimized operations, are saved when the best cost-effective process simulation software and professional chemical engineers are used to retrofit bottleneck processes and optimization implemented.
​
You can rely on us to give you the required assistance to push your plant to the 100% required.
Macroscopic view of what we do
-
We conduct research and develop new and improved manufacturing processes, establishing safety procedures to use while working with dangerous chemicals
-
We develop processes used to separate components of liquids and gases and solids to produce refined products required by our clients
-
Design and plan the layout of equipment used in the chemical processes, conducting tests and monitoring the performance of processes throughout the production.
-
We simulate and Troubleshoot problems in installed equipment and manufacturing processes, evaluating equipment and processes to check compliance with safety and government regulations.
-
Liaising with the financial departments to estimate production costs and create budgets for manufacturing management.
-
Click the Business Button to set up a meeting with us.